گەڕانەوە بۆ کارەکان

Mitas Energy

1 هەفتە لەمەوبەر

پلاندانەری بەرزکردنەوە

ناونیشانی ڕاگەیاندن: Lifting Planner

مووچە
ئاشکرا نەکراوە
جۆری کار
گرێبەست
شوێن
بەسرە
دوا ڕۆژ
21 ئەیلوول 2026

Mitas Energy بۆ پڕۆژەیەکی نێودەوڵەتی EPCی گواستنەوە و سەبستەیشن لە بەسرە پلاندانەرێکی بەرزکردنەوە بە گرێبەستەوە دادەمەزرێنێت. کاندید دەبێت لانیکەم ٣ ساڵ ئەزموونی پلاندانانی بەرزکردنەوە، زانیاریی کرێن و ریگینگ و توانای باشی زمانی ئینگلیزی هەبێت.

ئیمتیازات

  • هاتوچۆ دابین دەکرێت
  • خواردن دابین دەکرێت
  • شوێنی مانەوە

لە ڕیکلامەکەدا

  • Company-provided accommodation.
  • Company-provided transportation.
  • Company-provided meals during the work rotation.
  • Opportunity to work on a major international EPC transmission and substation project.

ئەرکەکان

  • Prepare and develop detailed lifting plans and lifting studies for construction, installation, and material handling activities in accordance with project requirements, approved procedures, and applicable lifting standards.
  • Review lifting requirements based on equipment weight, dimensions, center of gravity, lifting points, site conditions, access, crane capacity, and required lifting radius.
  • Select appropriate cranes, lifting equipment, accessories, and rigging arrangements based on the approved lifting plan and site conditions.
  • Prepare crane positioning plans, lifting sketches, load charts, rigging arrangements, and other technical documents required for safe lifting operations.
  • Verify crane capacities, working radii, boom configurations, counterweights, ground bearing requirements, and applicable load charts for planned lifting activities.
  • Prepare lifting plans for heavy and critical lifts, including transformers, GIS equipment, switchgear, structural steel, electrical equipment, construction materials, and other major project components.
  • Review and verify the suitability and certification status of cranes, lifting accessories, rigging equipment, spreader beams, shackles, slings, lifting beams, and other lifting equipment prior to use.
  • Coordinate with Construction, Engineering, HSE, QA/QC, Logistics, Equipment, and subcontractor teams to ensure lifting activities are properly planned and executed.
  • Conduct site visits and verify actual lifting conditions, including crane access, working area, ground conditions, obstructions, overhead restrictions, exclusion zones, and equipment positioning.
  • Identify potential lifting hazards and ensure appropriate control measures are incorporated into lifting plans and risk assessments.
  • Support the preparation and review of Method Statements, Risk Assessments, JSA/JHA, Lift Plans, and lifting permits.
  • Ensure that lifting operations comply with approved lifting plans, project procedures, HSE requirements, and applicable international standards.
  • Coordinate with Crane Operators, Lifting Supervisors, Banksmen/Signalmen, Riggers, Site Engineers, and other personnel involved in lifting operations.
  • Provide technical support during lifting operations and make adjustments to lifting plans when site conditions differ from the original plan.
  • Review subcontractor lifting plans and lifting studies and provide technical comments or recommendations where required.
  • Maintain a register of lifting plans and ensure that all required lifting documentation is reviewed, approved, and available before commencement of lifting activities.
  • Verify that cranes and lifting accessories have valid inspection, examination, and certification records before being utilized.
  • Assist in determining crane requirements and provide technical input for crane mobilization, selection, and positioning.
  • Prepare lifting schedules in coordination with the project construction and installation schedule.
  • Monitor planned lifting activities and ensure that critical and complex lifts are adequately planned in advance.
  • Participate in pre-lift meetings, toolbox talks, lifting coordination meetings, and site inspections.
  • Support investigations of lifting-related incidents, near misses, equipment failures, or unsafe conditions and provide technical recommendations where required.
  • Maintain accurate and traceable records of lifting plans, crane documents, lifting equipment certificates, inspection records, and related documentation.
  • Prepare Excel-based lifting registers, crane utilization schedules, lifting equipment trackers, and other planning reports.
  • Ensure that lifting documentation is properly controlled, updated, and readily available for site execution and audits.
  • Support the Lifting Supervisor and HSE team in maintaining safe and efficient lifting operations throughout the project.

مەرجەکان

  • Minimum 3 years of experience in lifting planning, preferably on EPC, power, transmission, substation, industrial, oil & gas, or major infrastructure projects.
  • Proven experience in preparing and reviewing lifting plans and lifting studies for cranes and heavy lifting operations.
  • Practical experience with mobile cranes, crawler cranes, truck cranes, and other heavy lifting equipment.
  • Strong knowledge of crane load charts, lifting capacities, working radius, boom configurations, outrigger loads, ground conditions, and crane positioning.
  • Good knowledge of lifting accessories, including slings, shackles, lifting beams, spreader beams, hooks, wire ropes, and other rigging equipment.
  • Experience planning lifts for transformers, GIS equipment, switchgear, electrical equipment, structural steel, and other heavy equipment is highly advantageous.
  • Ability to calculate and verify load weights, center of gravity, sling angles, lifting capacities, crane utilization, and rigging configurations.
  • Good understanding of lifting-related risk assessments, Method Statements, JSA/JHA, permits, and safe systems of work.
  • Familiarity with applicable international lifting standards and recognized industry practices, such as ASME B30 series, BS/EN standards, LOLER, and relevant project lifting procedures.
  • Ability to read and interpret engineering drawings, equipment datasheets, lifting points, structural drawings, and equipment layouts.
  • Experience with crane positioning studies and assessment of ground bearing capacity is an advantage.
  • Familiarity with lifting planning and engineering software is an advantage.
  • Good proficiency in Microsoft Office, particularly Excel and Word.
  • Strong communication and coordination skills with construction, engineering, HSE, crane, and subcontractor teams.
  • Strong attention to detail and ability to identify potential lifting risks before execution.
  • Ability to work effectively under construction schedule pressures while maintaining safety requirements.
  • Good written and spoken English.

تێبینی

  • Candidates must clearly demonstrate their previous lifting planning experience, crane and rigging knowledge, and experience preparing lifting plans/studies in their CV.
  • Candidates whose CVs do not clearly demonstrate relevant lifting planning and heavy lifting experience will not be considered.

شارەزاییەکان

  • پلان و توێژینەوەکانی بەرزکردنەوە
  • خشتەکانی بارەکانی کرێن
  • توێژینەوەکانی دانانی کرێن
  • کرێنی جوڵاو
  • کرێنی کڕاولەر
  • کرێنی کامیۆنی
  • کەرەستەکانی ریگینگ
  • هەڵسەنگاندنی مەترسییەکان
  • Method Statements
  • JSA/JHA
  • مۆڵەتەکانی بەرزکردنەوە
  • ASME B30 series
  • BS/EN standards
  • LOLER
  • وێنەکێشانە ئەندازیارییەکان
  • داتا شیتەکانی کەرەستە
  • توانای هەڵگرتنی زەوی
  • نەرمەکاڵای پلاندانانی بەرزکردنەوە و ئەندازیاری
  • Microsoft Office
  • Microsoft Excel
  • Microsoft Word

وردەکاری

پیشە
پلاندانەری بەرزکردنەوە
بەش
ئەندازیاری
ئەزموون
3+ ساڵ
زمانەکان
ئینگلیزی

بینینی ڕاگەیاندنە سەرەکییەکە

پێشکەشکردن لە ماڵپەڕی سەرەکی